Home >> BLOG

Thai Menstrual Pants Size Chart: Where L and XL Overlap

Thai Menstrual Pants Size Chart: Where L and XL Overlap

A Thai menstrual pants size chart can show two valid choices for the same hip measurement. Nafei’s LANCOOL Light & Breathable Thai pack lists L at 85 to 105 cm and XL at 90 to 115 cm. A buyer evaluating the 90 to 105 cm overlap can request both sizes and compare them on the same wearer before choosing quantities for each size.

Read the Thai menstrual pants size chart by interval

The numbers describe suggested hip measurements for the wearer. Start with the actual measurement and the exact product reference, since size letters alone cannot identify which chart was used. In this example, 88 cm falls in the published L range, 98 cm falls in both ranges and 110 cm falls in the published XL range. These examples explain which samples to request. The wearer still needs to check how the garment sits in use, especially close to the ends of an interval.

Hip measurementPublished chart matchSample comparison
88 cmLCheck whether the waistband and leg edges stay in place during movement.
98 cmL and XLCompare both sizes on the same wearer.
110 cmXLCheck where the elastic sits when standing and sitting.

Record the measurement unit and ask the trial team to use the same tape and measuring instructions. A shopper’s usual clothing size may be a useful comment, but it cannot be entered in the measurement column. Use the sanitary pants size guide to set up the worksheet, then copy the model-specific ranges from the actual pack or approved product sheet.

Issue two samples to each reviewer in the overlap

A comparison is clearer when the same wearer tries both sizes of the same model. Keep the product line, measurement routine and movements consistent. Have some reviewers start with L and others start with XL so the first sample does not always become the reference in the same direction. Let the wearer explain their preference before showing them which size another person chose. A preferred fit is useful feedback even if a different wearer with the same measured hips chooses the other size.

For each pair, identify the sample code and where the waist and leg edges sit while standing, sitting and walking. Ask whether the waistband rolls, whether an edge presses, and whether the wearer needs to adjust the garment after sitting. Capture the location and movement behind a comment such as loose or tight. A loose waist and a loose leg opening are different observations, and they may lead to different follow-up questions for the supplier.

Use the three-piece packs to repeat a fit observation

The published LANCOOL Thai pack has three pieces per retail pack in both L and XL. Each pack is sold by selected size, so the trial requires a separate pack of each. Label the receiving record with the model, size and pack identifier before assigning samples. A spare piece from the same pack can help check whether a difficult adjustment was a one-off or something the wearer experiences again.

A first fitting can be a dry comparison focused on positioning and comfort. If the buying team later needs to compare overnight use, write that as a separate trial question and use separate samples. Keep any report on liquid performance tied to the actual method and sample tested. A better dry fit at the waist does not establish what the absorbent core will do under different loads or sleeping positions. Record both fields independently in the buyer brief.

Check where the size information appears in Thai

For a package conversation, ผ้าอนามัยแบบกางเกง is a Thai candidate term for the pants-shaped sanitary product, while วิธีเลือกไซซ์ is a phrase to discuss when developing size guidance. Show the actual bag to a Thai-speaking reviewer and ask them to find the size letter, the measurement range and the place on the body being measured. Give them a realistic scenario such as a shopper with a 98 cm hip measurement and see whether the bag makes it clear that two options fall within the chart.

If the size mark appears on more than one face of the pack, have the reviewer compare each mark with the actual contents. Also take one photo with the product standing on a shelf and another at the angle intended for the product listing. A size range that is legible on a flat design file can be hard to read near a folded seam or in a cropped listing photograph. Keep the approved photo with the matching artwork and specification revision.

Estimate the size split using requests and fit results

Mark the Thai menstrual pants size chart with grouped trial observations and retain the number of people who tried each size. If many participants fall in the overlap, break out their preferences and the reasons given. If few measurements fall near the higher end of XL, the trial offers limited evidence about that end of the range. Avoid turning a small sample into a recommended national size mix. Use it to choose a first split for the actual sales channel, then revise it against requests and returns.

Keep the size evaluation separate from carton arithmetic. The published example has 100 retail packs per carton and three pieces per pack. In an order sheet, write the number of cartons or packs for each size in separate rows, and confirm whether the supplier allows any mixed-size carton arrangement. The menstrual pants wholesale page is a starting point for checking order format and quantities.

Send a brief tied to one pack revision

Share the exact product reference, pack language, candidate hip ranges, size quantities and shipment destination through the Nafei contact page. Nafei ships from China and does not hold local stock for this program. Ask for the proposed sample dispatch date, the sizes included and the approved pack artwork before committing to a delivery date.

After the first shipment, save a pack of each approved size as a reference. If the next batch uses a revised pack or a modified elastic arrangement, repeat the matching fit check before applying the previous trial conclusions. The short record that travels with the reorder should say what the range covers, which wearers actually tried both sizes, and how those trials informed the quantity split.

On the response sheet, distinguish the person who assigns samples from the person who reads the results. The sample coordinator needs the actual size to avoid swapping packs. The reviewer can first read the fit descriptions using sample codes, then look up the size. That order helps them notice a consistent observation before deciding which size it favors. If a participant tried only one of the two requested sizes, keep the feedback in the single-size column and leave the preference column blank.

Send the importer a summary with photographs of the marked packs and the trial count for each hip group. If a partner proposes a new chart range, ask which measurements and movement observations led to it. Keep that proposal separate from the current packaging specification until a revised chart has been checked against the same finished product. The product reference for this worked example is the LANCOOL Light and Breathable Thai Pack, stock sheet QT-2026-0012.

Share LinkedIn X Facebook WhatsApp

Turn this note into a real production brief

Tell us the product type, target market, pack format and quantity you have in mind. We will reply with material options, tooling considerations and a sample timeline.

Request a quote WhatsApp
WhatsApp contact WeChat QR code

Nafei WeChat QR code