Home >> Buying Guides

Starting a Period Underwear Brand with an OEM Factory

A period underwear brand is decided by four fields, not a logo. What to lock before the first order, how cost is built, and the four mistakes that sink a first launch.

Verified OEM Supplier Guangdong Nafei Industrial Co., Ltd.
ServiceOEM / ODM
BrandingPrivate Label
SamplesSample Review
PackagingCustom Packing

Share target market, size range, pack count, artwork status and order quantity for quotation.

Introduction

Most first-time brand owners arrive with a name, a logo and a photograph of a product they like. None of those three items can be quoted, sampled or produced. What can be quoted is four fields, and until those four are written down, every conversation with a factory is a conversation about nothing.

The four are the size ladder, the capacity band, the waist construction and the pack format. Each one locks a set of costs that cannot be recovered later without a new tool or a new plate. This page sets out what each field decides, how the cost is built, and where first launches usually go wrong.

Table 1. The four fields and what each one locks
Field What it decides Change cost after the first order
Size ladderPattern grade, cutting dies, carton count per sizeNew grade and new cut file
Capacity bandSAP load, core length, film gaugeNew core spec, new test run
Waist constructionElastic type, tension, whether the edge is coveredNew elastic spec and line setting
Pack formatBag or box, print plates, inner and outer countNew artwork or new plate

Field one: the size ladder

A ladder is not a list of sizes on a pack; it is a set of graded patterns. Three sizes with a proper grade cost less to launch than five sizes with a thin grade, because each additional size multiplies the carton count, the shelf space and the stock a distributor has to carry.

For a first range we usually suggest three sizes covering the middle of the market and one extension size, chosen from the market the brand is selling into rather than from a generic chart. A brand that adds an extra-large size later pays for a new grade, not a new tool, which is a manageable cost. A brand that launches with seven sizes pays for seven forecasts it does not have.

Field two: the capacity band

Capacity is decided by the use occasion, not by the highest number a competitor prints. A daytime range usually sits in one band and an overnight range in another, and mixing them into a single SKU produces a pant that is too thick for day and too thin for night.

Each band fixes the SAP load, the core length and the backsheet gauge together. Raising one without the others raises the tested capacity and leaves the wearer with a pant that feels wet sooner, because the liquid has nowhere to go inside a core that is still too short.

Where a brand wants a capacity figure on the pack, the test method has to be named next to it. We will not print a number that has no method behind it, because the first buyer who asks how it was measured will not accept a shrug.

Field three: the waist construction

Elastic is where a cheap pant announces itself. A soft tension with a covered edge costs more per unit and is the difference between a product that can be worn for a working day and one that leaves a mark after two hours.

There are two common constructions: a folded nonwoven waist with elastic strands, and a laminated waistband. The first is lighter and suits a thin daytime pant. The second holds tension better around a fuller shape and suits an overnight or postpartum brief. A brand does not need both at launch, but it should know which one it is buying.

Field four: the pack format

The pack format decides more of the unit cost than most first buyers expect, because it carries the print plates, the fill labour and the carton cube at the same time.

A printed bag needs a plate per design and per size if the size is printed. A plain bag with a label needs no plate but costs labour at filling. A printed box holds its shape on a shelf and costs more to ship because it does not compress. A brand that plans to sell online only can use a plain bag and put the design on the outer carton, which is the cheapest way to launch and the least flexible once retail asks for shelf-ready packaging.

How the unit cost is built

Five items move the unit cost, in roughly this order: the core specification, the pack count, the pack material and print, the carton and pallet pattern, and the order quantity per size.

The last one catches people. A factory quotes against a run quantity per size, not a total, because setting up a line for a small quantity of one size costs nearly as much as running a large one. A brand that spreads a modest total across five sizes gets a higher unit price than the same total across three, and the difference is not a negotiation tactic.

We quote minimum order per size in cartons, and we do not put a number in a brochure, because the number depends on the construction and on the material lead time in the month of the order. A brand that wants a planning figure should ask for one against a specific brief and expect it to be valid for a stated period rather than indefinitely.

The timeline from brief to first shipment

A first order typically runs through six steps: brief lock, quotation, sample, golden sample approval, production, and shipment. The sample step is the one that slips, usually because artwork arrives late or because the brief changes after the sample is made.

From a locked brief, a sample takes 7 to 12 days. A new size grade adds a few days. Production after golden sample approval depends on material lead time, and a plain pack is faster than a printed one because there is no plate to make.

What compresses the timeline is not pressure on the factory. It is a brief that does not change after the sample, and artwork that arrives before the golden sample rather than after it.

Four ways a first launch goes wrong

The first is launching too many SKUs. A range of twelve variants looks like a brand and behaves like twelve inventory problems, and the fastest-moving variant sells out while the others sit.

The second is specifying from a photograph. A picture cannot show gusset width, core length or film gauge, and a brief built from one produces a sample that does not match the expectation, which then gets blamed on the factory.

The third is ignoring the carton count. A brand that plans storage after the first shipment usually discovers that the carton does not fit the space it rented.

The fourth is promising a delivery date before the material is locked. Fabrics and SAP are bought against a specification, and a date given before the specification is fixed is a date given about nothing.

What the factory needs from the brand

To quote: the four fields, the target market, the expected first quantity per size, and the destination. To sample: the same four fields plus artwork if the pack is printed, and the logo file in a vector format. To produce: an approved golden sample and a written confirmation that the specification will not change.

That is a short list, and a brand that arrives with it moves faster than one that arrives with a deck. We have been making disposable period pants and sanitary pads since 1998, and the briefs that go smoothly are almost always the short ones.

Photos

OEM RFQ NEXT STEP

Send a sampling brief for Starting a Period Underwear Brand with an OEM Factory

Tell Nafei your target market, size range, absorbency preference, packaging artwork status and estimated order plan. Our team can reply with sample discussion and quotation details.

  • Target market and sales channel
  • Size, pack count and material preference
  • Private label artwork or packaging reference
  • Sample review, quantity and delivery timeline
WhatsApp contact WeChat QR code

Nafei WeChat QR code