Home >> Buying Guides

What Period Underwear Absorbency in ml Actually Means

A millilitre figure on a period pant pack can mean three different things. How capacity is measured, what a cycle produces, and which number belongs on your pack.

Verified OEM Supplier Guangdong Nafei Industrial Co., Ltd.
ServiceOEM / ODM
BrandingPrivate Label
SamplesSample Review
PackagingCustom Packing

Share target market, size range, pack count, artwork status and order quantity for quotation.

Introduction

A buyer sends a message asking how many millilitres our period pants hold. It is a fair question with three answers, and the wrong answer travels straight onto a pack for the next five years. In our experience the number on the pack is usually a saturation figure, while the number the wearer cares about is a working figure, and the two sit far apart. Three answers. Only one belongs on the pack.

This page explains what the three numbers are, how we measure them, and how to write a capacity claim that will survive a customer measuring it at home.

Table 1. Three numbers that get called the same thing
Number How it is obtained Typical result, pants format Safe to print?
Saturation capacityCore soaked until no more is taken up200 to 400 mlNo
Working capacityLoad rate and pressure applied, endpoint at surface wetness80 to 150 mlYes, with method
Usable capacityWear trial, measured by fill level without leakageHalf to two thirds of workingRarely printed, but this is what users experience

Why the saturation figure is the wrong one to publish

Every core will take more fluid than a person can comfortably wear. Soak it long enough and a 1.2 g SAP core in a pants format will hold several hundred millilitres. That number is real, and it is useless to a customer, because long before it is reached the surface stays wet and the pant feels heavy.

Publishing the saturation figure invites a comparison test at home with a measuring cup. The brand loses that test. A pack that says 120 ml with a method behind it survives the same test, because the number matches what a person can actually wear.

For the record, our standard pants briefs use 1.0 to 1.4 g of superabsorbent and are quoted at 80 to 150 ml working capacity across the size run. The range moves with size because the core area moves with size.

What a cycle actually produces

Published clinical figures put a full menstrual cycle at roughly 30 to 80 ml of fluid. A light day can be under 10 ml. A heavy day can exceed 30 ml, and a heavy cycle can go past 80 ml in total.

Two things follow. First, a 100 ml working capacity is generous for most users on a normal day. Second, a small share of users will use most of it on their heaviest night, which is why the overnight brief is a different product and not a thicker daytime brief.

When a brand tells us its target user has heavy flow, we ask for a distribution rather than an average. Ten users describing their heaviest day tells us more than a single mean, because the design has to work at the top of the distribution and the pack claim has to be true at the middle. Ten users beat one average.

How we measure working capacity

The method we use in the sample room loads the finished pant with saline at body temperature, at a controlled rate, through a plate that applies light pressure. The endpoint is surface wetness at the load point, checked by blotting at fixed intervals. Every report we send names the load rate, the pressure and the endpoint.

This matters more than the figure itself. Two labs can test the same pant and report 90 ml and 160 ml, and both reports are honest, because the load rates differed. Two labs, two honest numbers. When a brand compares our number with a competitor's number and finds a gap, the gap is usually the method, not the product.

If your market requires a specific standard for absorbency on sanitary products, send the standard number and version with the brief. We test to the version in force and we will say so when a requested figure cannot be reached within the construction you have chosen.

Reading a competitor's claim without copying it

Take a pack that claims a night's protection without a number. Treat it as a positioning statement, not a measurement. Take a pack that claims a number in millilitres. Assume saturation unless the pack or the brand's site states the method, and even then check whether the figure is for the whole size run or one size.

What is worth copying is the structure of the claim, not the value. A claim that names the form, the size, the method and the wear window is defensible. One that names only a number is not.

We will match a competitor's working capacity where the construction allows it, and we will tell you when reaching it would make the pant stiff enough to fail a comfort test. That trade is real and it belongs in the brief, not in a surprise at the sample stage.

The four fields to lock in the RFQ

Write the capacity band, the size it applies to, the method used to obtain it, and the wear window the claim refers to. Those four lines remove almost every later argument about absorbency, because each one closes a door that a claim could otherwise walk through.

A fifth field is optional and often useful: the failure mode the brand wants fixed. Capacity is a poor proxy for what customers complain about. Leaks at the cuff and wetness at the surface are different problems, and neither is solved by adding grams of SAP.

Sampling runs 7 to 12 days from a locked brief. Capacity testing on the sample adds two working days, and we send the raw numbers rather than a pass mark.

Photos

OEM RFQ NEXT STEP

Send a sampling brief for What Period Underwear Absorbency in ml Actually Means

Tell Nafei your target market, size range, absorbency preference, packaging artwork status and estimated order plan. Our team can reply with sample discussion and quotation details.

  • Target market and sales channel
  • Size, pack count and material preference
  • Private label artwork or packaging reference
  • Sample review, quantity and delivery timeline
WhatsApp contact WeChat QR code

Nafei WeChat QR code