What is the quality control process for OEM sanitary napkins

What is the quality control process for OEM sanitary napkins

In the production process of OEM sanitary napkins,quality control is a key link to ensure product safety and effectiveness.Manufacturers such as Nafei typically follow a series of strict quality control processes to ensure that each batch of products meets standards.The following are the main steps of the OEM sanitary napkin quality control process:

1.Raw material inspection

All raw materials entering the production line must undergo strict inspection.Manufacturers will conduct physical and chemical tests on raw materials to ensure they meet predetermined quality standards.This includes inspection of key materials such as absorbent cores,non-woven fabrics,and adhesives.

2.Process monitoring

During the production process,the quality control team will conduct regular process inspections.These inspections aim to promptly detect and correct any deviations,ensuring that every step of the production process meets established standards.For example,manufacturers will monitor key steps such as the formation of absorbent cores,the addition of fins,and the application of top and bottom layers.

3.Test phase

Before formal production,the R&D team will provide raw material standards and determine the initial process.At this stage,the quality department of the OEM factory will conduct product testing as required to confirm whether the raw materials and processes used meet the standards.

4.Finished product testing

After production is completed,the finished product will undergo comprehensive laboratory testing.These tests evaluate the absorption capacity,water leakage resistance,and other performance parameters of the product.The product can only be shipped after ensuring that all tests are qualified.

5.Handling of non-conforming products

If non-conforming products are found at any stage,the OEM factory must immediately notify the on-site quality assurance and initiate the non-conforming product handling process.This process includes isolating non-conforming raw materials and finished products,analyzing the causes,and taking corrective measures.

6.Regular review and recording

Manufacturers also need to regularly review the qualification information of raw material suppliers and maintain records of product quality data.These records should be provided to relevant departments in a timely manner when needed for quality traceability and improvement.

Through the above process,OEM sanitary napkin manufacturers can effectively manage product quality,ensuring that the final product not only meets market demand,but also safeguards consumer health and safety.